VMWare‎ > ‎

Enable Jumbo Frames on Hardware ISCSI HBA vmhba

posted 12 Jun 2011, 07:04 by Tristan Self
If you need to use jumbo frames on your ISCSI you need to run this command from the command line of the ESX host:

esxcfg-hwiscsi -j enable <vmhbaX>

e.g.

esxcfg-hwiscsi -j enable vmhba1

You'll need to reboot to let the changes take effect. To verify run:
esxcfg-hwiscsi -l – lists the current settings.

http://www.vi-tips.com/2009/04/configuration-of-iscsi-in-vmware-vi3.html

Comments